Loose flange
PP steel
- Material: PP glass fiber reinforced with steel inlay
- drilled according to DIN EN 1092-1
- suitable for stub end
- other dimensions and pressure classes on request
Note:
- Use washers when screwing
- Do not exceed the maximum permissible operating pressure of the seals used
Loose flange for stub end,
PP glass fiber reinforced with steel inlay,
connecting dimensions of flange
according to DIN EN 1092-1 – PN …,
outside diameter d …… mm, DN …..,
pressure load up to d 400: 16 bar, from d 400: 10 bar
(manufacturer: STAR Piping Systems GmbH,Wesel
technical datasheets at www.star.de.com
Tel.: 0281/98414-0 or similar)
©
©
We are happy to produce special dimensions and customized prefabrications for you on request.
Contact us - we are happy to advise you!Ideal addition:
Complete your selection with these matching products
STUB ENDS
Delivery programm:
SDR33: d 110 - 2000mm | SDR26: d 1200 - 2000mm| SDR17: d 50 - 2000mm | SDR11: d 20 - 1600mm | SDR9: d 63 - 900mm | SDR7,4: d 63 - 630mm
RUBBER STEEL GASKETS
Delivery programm:
d 32 - 630 mm
made of NBR-DUO or EPDM
Dimensions adapted to Stub ends
General delivery program of our flange connections:
- Stub end: short spigot | long spigot
- Outlet flange adaptor
- Rubber Steel gasket: NBR-DUO | EPDM
- Loose flange: PP Steel |kplastic coated | steel hot-dip galvanized | GGG epoxid goated | for outled flange adaptor | ANSI 150
- Blind flange
- Blanking flange set
- Special flange: short spigot | long spigot
- Full face flange: short spigot | long spigot
